Effect of temperature on the interactions between cellulose and lignin via molecular dynamics simulations

Cellulose - Heating is essential in various biomass pre-treatments and thermal conversion processes. It is of practical significance to study the characteristics of cellulose-lignin and...     

算子代数上2-局部Lie三重导子的结构

设X是维数大于2的Banach空间,映射δ:B(X)→B(X)是2-局部Lie三重导子,则对所有A∈B(X)有δ(A)=[A,T]+φ(A),这里T∈B(X),φ是从B(X)到FI的齐次映射且满足对所有A,B∈B(X)有φ(A+B)=φ(A),其中B是交换子的和.     

(111)择优取向ZnS薄膜的制备及特性研究

采用激光分子束外延技术在Al2O3衬底上成功外延生长了ZnS薄膜.用X射线衍射、扫描电子显微镜和光致发光谱表征了衬底温度对薄膜结构、形貌和光学特性的影响.结果表明所生长的ZnS薄膜为闪锌矿,具有(111)择优长向,随衬底温度的升高,X射线衍射峰的半高宽先减小后增大,在衬底温度为300℃时,半高宽最窄.薄膜结构致密,表面不平整度随衬底温度的升高而增大.薄膜的带隙随衬底温度的升高出现蓝移,可见光区域透射率最高达到98;,在360 nm激发波长下,观测到402 nm和468 nm两个发光带,衬底温度为300℃时,发光最强.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

双子佯谬与星际航行

计算了在两个假想的星际航行方案中,与"双子佯谬"相关的时间差别.这种差别体现了惯性与非惯性参考系经历的时间有绝对差异,而不再是"相对"效应.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

Terahertz radiation from pentacene organic diode at room temperature

We investigate terahertz radiation(T-rays) from a pentacene organic diode at room temperature. The quantum chemistry calculation for frequency-related Huang–Rhys factor of pentacene is also carried out. The results demonstrate that the T-rays can come from a bending vibration of pentacene skeleton after the energy of pentacene exciton transferring to the vibrational excited state via electron–phonon coupling. Frequency and natural bond orbital analytics of pentacene and its derivatives are performed in order to explain the result and develop new materials to get higher emission. This work provides a new way to produce T-rays with a simple device at room temperature.     

Spatially modulated polarimetry based on a vortex retarder and Fourier analysis

We report a spatially modulated polarimetry scheme by using a zero-order vortex half-wave retarder(ZVHR)and a spatial Fourier analysis method.A ZVHR is employed to analyze the input polarized light and convert it into a vectorial optical field,and an analyzer is set after the ZVHR to form an hourglass intensity pattern due to the spatial polarization modulation.Then,the input light’s Stokes parameters can be calculated by spatial Fourier analysis of the hourglass pattern with a single shot.The working principle of the polarimeter has been analyzed by the Stokes-Mueller formalism,and some quantitative measuring experiments of different polarization states have been demonstrated.The experimental results indicate that the proposed polarimeter is accurate,robust,and simple to use.     

Portfolio Selection and Risk Control for an Insurer With Uncertain Time Horizon and Partial Information in an Anticipating Environment

Methodology and Computing in Applied Probability - This paper is devoted to the study of an optimal investment and risk control problem for an insurer. The risky asset process and the insurance...     

三维层状双金属氢氧化物(3D-LDHs)的制备及应用概述

三维层状双金属氢氧化物简称3D-LDHs,是在制备普通二维层状金属氢氧化物(2D-LDHs)的过程中,改变反应条件得到的三维结构产物.它的组成单元与二维产物相同为完整LDHs纳米片,基本保留了LDHs具有的碱性、阴离子可交换性和记忆效应等特点,同时又因三维结构获得了更大的比表面积、丰富的孔隙结构以及形成复合材料的能力,在吸附、催化和电化学等方面的应用性能得以增强.本文概述了3D-LDHs的组成结构、主要制备方法及产物形貌,并对未来的研究方向进行了展望.